top of page
Premium Conservation-Grade Comic Book Frame, 15" x 11.75", MTO

Premium Conservation-Grade Comic Book Frame, 15" x 11.75", MTO

This is a made-to-order premium conservation-grade frame made to present a single issue or double issue (unbagged and unboarded) comic book.

Comic is not included with purchase.


These are not mass-produced and are true custom frames which can be altered to your specifications.


    There are two frame choices available for this item:

    • Flat black contemporary wood frame (approximately 3/4" wide)
    • Antique silver finish wood frame (approx. 1 1/8" wide)

    If you would like to discuss other moulding options and prices, please contact SecondMoonshot prior to placing an order.



    There are two glass options available for this item:

    • Recovered standard glass (pictured)
    • Recovered non-reflective glass

    All recovered glass is scratch-free. Recovered glass enables SecondMoonshot to pass savings on to you. If you would like to discuss other glass options and prices, please contact SecondMoonshot prior to placing an order. 



    Please provide the dimensions of the backing board of your comic to the nearest 1/16”. This is to ensure a perfect fit for your comic.



    Choose your own mat color(s). A single or double mat is available. (Single mat is pictured.)

    • Mat Color Code (Inner/Outer): Please provide at least one 4-digit color code from the Crescent Store for the Select product line. (Only the standard Crescent Select mats which are on page 1-4 beginning with a “9” are available at this price.) I would also recommend you provide a backup color in case primary is out of stock. Alternatively, simply describe what you're looking for (i.e “beige”, “light blue”, etc.)
    • For a double mat, please specify at least one color you would like for the inner mat and at least one color for the outer (top) mat. If only one color is provided in this field, a single mat will be assumed.

    You can easily open the frame to replace the comic with another at any time. No adhesives are used to secure the comic in place; it simply rests in an inset area.

    You will need a small Phillips head screw driver. Inserting the comic is as simple as loosening and rotating the clasps around the edge. You will place your comic in the cradle and position. Finally, make sure the comic is oriented to your liking and insert the stack back into the frame and rotate the clasps back and tighten. Then attach the hanging wire.


    Overall product dimensions:

    • With Flat Black moulding: 15" (L) x 11.75" (W) x 3/4" (D)
    • With Antique Silver moulding: 16" (L) x 13" (W) x 3/4" (D)

    Priced as pictured, with flat black contemporary wood moulding with New Tru-Vue Conservation Clear UV Glass (99%).

    The back has a wire hanger. There will be two bumpers at the bottom two corners. Also included is a wall picture hanging hook and nail.

    Preservation quality: All acid-free materials are used that come in contact with the book. Mylar-D protects the back of the book from coming in contact with the cut foam core center comic inset.


    FREE SHIPPING! Shipping will be through UPS Ground or USPS Ground Advantage. Orders take 3-5 days to complete. Message me if you need it sooner.

    No PO Boxes please.

    Local pickup available at 100-B N Main St, Rolesville, NC 27571.



Buy 2 or more products for 10% off

bottom of page